AR212-PB OLED Dual output fiber Amplifier
• Individual adjustment thresholds of Red and Blue or two sets of auto teaching function.
• Red and Blue emitter power (EPO) 0~100 steps individual adjustment.
• Output 1 is in normal detection mode. Output 2 can be set to normal, AND, or OR mode.
• Individual logic delay mode and time adjustment for Red and Blue.
• CH1: Normal mode supports dual output; CH2: Logic mode provides single output.
• 5 Power rate selections (PO1~PO5).
Description
Specification
| Light Emitter | Red LED 623nm,Blue LED 480nm |
|---|---|
| Operating voltage | DC12 ~ 24 ± 10% |
| Current consumption | Maximum 100 mA Max. (+12VDC)，50 mA (+24VDC) |
| Load current | 100 mA ± 10% @ DC 24V |
| Model / Type | PNP,PNP output |
| Insulation resistance | 20M ohm min.(DC 500V) |
| Voltage withstandability | AC 1000V 60Hz 60 Sec |
| Opera tetemperature | - 10 ℃ ~ + 60 ℃ |
| Operating temperature | 35% ~ 85% RH |
| Protection degree | IP40 |
| Casing material | ABS+PC |
| Wiring method | M8 pigtailed type |
| Weight | 35 g |
| Reaction time | PO1:1.5ms,PO2,PO3: 0.8ms, PO4: 0.4ms, PO5: 0.2ms |
| Protection circuit | Reversed supply circuit protection. |
| Indictors | Output Indicator: Red LED,Blue LED |
| Display LED | (0~9999) Output Value,(30~9999) Threshold Value,Logic Parameter Function |