OAP-2008S-NK Area Sensor
• Ultra slim body, 13mm thickness only.
• Min. Detectable object Ø30mm.
• Green and red LED blink in sequence from top to buttom under normal emission. ALL LED light up under the emittingcircuit failure.
Description
Specification
| Sensing distance | Through beam / 對照式 |
|---|---|
| Resolution | 60 mm opaque object 不透明物體 |
| Detection distance | 0.3 M ~ 2 M |
| Detection height | 140 mm |
| Light Emitter | infrared LED : 850nm |
| No. of Beams | 8 |
| Beam pitch | 20 mm |
| Indication LED | 在發射端與接收端各有5個LED燈，在正常通電情況下，LED燈由上而下的閃爍。在發射端光軸被阻隔時，所有LED燈會全亮。如果恢復正常，即發射端光軸不被阻隔，LED恢復由上往下的閃爍。 |
| Running type | More than one beam is covered ON (Dark On) / 任意一個光束被遮斷即輸出 |
| Operating voltage | DC12 ~ 24 V±10% (ripple P-P：10% Max.) |
| Current consumption | Transmitter : 90 mA Max. Receiver : 35 mA Max. |
| Load current | 100 mA Max at DC 24V |
| Protection circuit | Reversed Supply circuit protection, Short circuit protection output / 電源反接保護及輸出短路保護 |
| Reaction time | Off to On : 15 ms Max. On to Off : 20 ms Max. |
| Insulation resistance | 20MΩ min. (DC500V) |
| Voltage withstandability | AC1000V 60Hz for 60 Sec. |
| Opera tetemperature | - 10 ℃ ~ + 45℃ (No freezing allowed / 不可結霜,結冰) |
| Operating temperature | 35% ~ 85% RH 相對溼度 |
| Storage temperature | - 10 ℃ ~ + 45℃ (No freezing allowed / 不可結霜,結冰) |
| Storage humidity | 35% ~ 95% RH |
| Protection degree | IP62 |
| Casing material | ABS |
| Wiring method | Transmitter : M12 pigtailed type / Receiver : M12 pigtailed type |
| Option | Mounting Bracket : OAP-M008 / Connectors: M125R-PUR-2M |
| Weight | 200g |