- Introduction
- Specification-40 Series
- Specification-20 Series
- Application
Dimensions
|
Indicator
|
Specifications
| Model | NPN D.on | OAP-4004-NK | OAP-4004S-NK | OAP-4008-NK | OAP-4008S-NK |
| PNP D.on | OAP-4004-PK |
OAP-4004S-PK |
OAP-4008-PK | OAP-4008S-PK | |
| Sensing type | Through beam | ||||
| Resolution | 60 mm opaque object | ||||
| Sensing distance | 0.1 M ∼ 5 M |
0.1 M ∼ 2 M | 0.2 M ∼ 5 M | 0.2 M ∼ 2 M | |
| Sensing Height | 120 mm | 280 mm | |||
| Emitting light | Infrared LED：850 nm | ||||
| No.of Beams | 4 | 8 | |||
| Beam pitch |
40 mm | ||||
| Indicating LED | 5 LEDs each on emitter and receiver. | 7LEDs each on emitter and receiver. | |||
| LEDs blink from top to bottom under the normal emission. All LEDs light up under the emitting circuit failure and will become blinking until the normal emission. | |||||
| Running type | More than a beam is covered ON﹙Dark On﹚ | ||||
| Operating voltage | DC12 ~ 24 V±10% (ripple P-P：10% Max.) | ||||
| Current Consumption | Transmitter：30 mA Max. | Transmitter：60 mA Max. | |||
| Receiver：15 mA Max. | Receiver：30 mA Max. | ||||
| Load current | 100 mA Max at DC 24V | ||||
| Protection circuit | Reversed Supply circuit protection, Short circuit protection output | ||||
| Response time | Off to On：15 ms Max. | ||||
| On to Off：20 ms Max. | |||||
| Insulation resistance | 20MΩ min. (DC500V) | ||||
| Voltage withstandabiligy | AC1000V 60Hz for 60 Sec. | ||||
| Operating temperature | - 10 ℃ ~ + 45℃ ﹙No freezing allowed﹚ | ||||
| Ambient humidity | 35% ~ 85% RH | ||||
| Storage temperature | - 10 ℃ ~ + 45℃ ﹙No freezing allowed﹚ | ||||
| Storage humidity | 35% ~ 95% RH | ||||
| Protection degree | IP62 | ||||
| Material | ABS | ||||
| Wiring method | Transmitter：M12 pigtailed type / 15cm (5P) | ||||
| Receiver：M12 pigtailed type / 15cm (5P) | |||||
| Weight |
Approx.200g | Approx.253g | |||
Dimensions
 |
|
Specifications
| Model | NPN D.on | OAP-2008-NK | OAP-2008S-NK | OAP-2016-NK | OAP-2016S-NK |
| PNP D.on | OAP-2008-PK |
OAP-2008S-PK |
OAP-2016-PK | OAP-2016S-PK | |
| Sensing type | Through beam | ||||
| Resolution | 30 mm opaque object | ||||
| Sensing distance | 0.6 M ∼ 5 M |
0.3 M ∼ 2 M | 0.9 M ∼ 5 M | 0.5 M ∼ 2 M | |
| Sensing Height | 140 mm | 300 mm | |||
| Emitting light | Infrared LED：850 nm | ||||
| No.of Beams | 8 | 16 | |||
| Beam pitch |
20 mm | ||||
| Indicating LED | 5 LEDs each on emitter and receiver. | 7LEDs each on emitter and receiver. | |||
| LEDs blink from top to bottom under the normal emission. All LEDs light up under the emitting circuit failure and will become blinking until the normal emission. | |||||
| Running type | More than a beam is covered ON﹙Dark On﹚ | ||||
| Operating voltage | DC12 ~ 24 V±10% (ripple P-P：10% Max.) | ||||
| Current Consumption | Transmitter：90 mA Max. | Transmitter：135 mA Max. | |||
| Receiver：35 mA Max. | Receiver：70 mA Max. | ||||
| Load current | 100 mA Max at DC 24V | ||||
| Protection circuit | Reversed Supply circuit protection, Short circuit protection output | ||||
| Response time | Off to On：15 ms Max. | ||||
| On to Off：20 ms Max. | |||||
| Insulation resistance | 20MΩ min. (DC500V) | ||||
| Voltage withstandabiligy | AC1000V 60Hz for 60 Sec. | ||||
| Operating temperature | - 10 ℃ ~ + 45℃ ﹙No freezing allowed﹚ | ||||
| Ambient humidity | 35% ~ 85% RH | ||||
| Storage temperature | - 10 ℃ ~ + 45℃ ﹙No freezing allowed﹚ | ||||
| Storage humidity | 35% ~ 95% RH | ||||
| Protection degree | IP62 | ||||
| Material | ABS | ||||
| Wiring method | Transmitter：M12 pigtailed type / 15cm (5P) | ||||
| Receiver：M12 pigtailed type / 15cm (5P) | |||||
| Weight |
Approx.200g | Approx.253g | |||
Dimensions
 |
|
●Detecting the falling objects in uncertain route.
|
●To prevent wrong access of parts-taking.
|
●Detecting a reel.
|
.